Programme Schedule

 

Programme at a Glance

 

Tuesday 8th August 2017 (Day 1)

15.00 – 17.00

Registration ( Hotel Lobby)

 

Wednesday 9th August 2017 (Day 2)

8.00 – 8.40

Registration

(Grand Ballroom Entrance)

8.40 – 8.45

Safety Briefing Grand Ballroom

8.45 – 8.50

Welcoming Speech

Assoc. Prof. Dr. Sallehuddin Mohamed Haris (Chairman of ReCAR 2017)

Grand Ballroom

(M/C: Dr. Hawa Hishamuddin)

8.50 – 9.00

Opening speech

Prof. Dato’ Seri Dr. Noor Azlan Ghazali (Vice Cancelor, UKM)

Grand Ballroom

(M/C: Dr. Hawa Hishamuddin)

9.00 – 9.05

Multimedia Presentation Grand Ballroom

9.10 – 9.50

Keynote 1

Dato’ Ahmad Fuaad Mohd Kenali (CEO, PROTON)

Grand Ballroom

(Chairperson: Prof. Ir. Dr. Ahmad Kamal Ariffin Mohd Ihsan)

9.50 – 10.30

Keynote 2: In A Rapidly Changing World, Can The Automobile Industry Learn Lessons From History? Dr. John Yates (Chairman, Engineering Integrity Society, UK)

Grand Ballroom

(Chairperson: Prof. Ir. Dr. Ahmad Kamal Ariffin Mohd Ihsan)

10.30 – 10.45

Photo Session

10.45 – 11.15

Coffee Break

Room

Grand Ballroom

Matahari I

Matahari II

Cempaka I & II

Sessions

Applied Mechanics/Control

Ergonomics

Thermofluids/Combustion

Materials

Chairperson

Assoc. Prof. Dr. Mohd Zaki Nuawi

Dr. Dian Darina Indah Daruis

Prof. Dr. Kazunari Kuwahara

Assoc. Prof. Dr. Zainuddin Sajuri

11.15 – 11.30

P033

Review of Battery State of Charge (SOC) Estimation Methodologies for Electric Vehicle Application

 

Molla Shahadat Hossain Lipu, M A Hannan and Aini Hussain

P078

Creating a Culture of Prevention in Occupational Safety and Health Practice: Perceived Body Discomfort in Two Sitting Positions

 

Sukadarin Ezrin Hani, Fong Suet Qian, Nur Syazwani Mohd Nawi, Baba Md Deros and Junaidah Zakaria

P057

The Effect of Injector Shearing on the Droplet Size Distributions and Micro- Explosion during the Leidenfrost Effect

 

Mhadi A. Ismael, Morgan Heikal and Abed Alrashid A. Aziz

P070

Improvement the Surface Properties of Prosthetic  implants through TiO2 coating by using Dip Coating Method

 

Dunia Sahib Hamdi and Wajdi Sadik Aboud

11.30 – 11.45

P024

Optimal Active Suspension System of a Quarter Car Model and Ride Comfort Testing Under Different Vehicle Velocity Using Global Search Optimization

 

Muna Khalil Shehan, Barkawi Barkawi, Nawal Aswan Abdul Jalil, Tang Sai Hong and Azizan As’Arry

P036

Deltoid Anterior Contraction in Maneuvering the Steering Wheel

 

Nor Kamaliana Khamis, Baba Md Deros, Dieter Schramm, Martin Koppers and Niko Maas

P062

Fuel Consumption Reduction By Increasing Thermal Efficiency Through Heating of Fuel

 

Edmund Hilary Nicholas and Kumaresan Magaswaran

P071

Atomic Simulations of Twist Grain Boundary Structures in Diluted Alloys of Magnesium in Aluminium

 

Siti Sarah Kamaludin, Prakash Thamburaja and Ahmad Kamal Ariffin

11.45 – 12.00

P054

Concept Design and Prototyping of Integrated Cooling System for the Crank Rocker Engine using Additive Manufacturing technologies

 

Khurram Altaf, Masri Baharom, A. Rashid A. Aziz, Junaid A. Qayyum and Mirza Jahanzaib

P039

Ergonomic Design Optimization for Train Seat Fit Parameters

 

Dian Daruis, Darliana Mohamad and Teo Chuun Ben

P058

The Influence of Air-Fuel Ratio on the Performance and Emission Characteristics of a Crank-rocker Engine

 

Salah Eldin Elfakki, Masri Baharom

and Abdul Rashid Abdul Aziz

P080

Simulation of Nanoindentation of Single and Multiple Coating Layers For Automotive Bearings

 

Wan Fathul Hakim W Zamri, Intan Fadhlina Mohamed, Muhamad Faiz Md Din and Khairunas Bakri

12.00 – 12.15

P027

Validation of a Chassis Model including Elastic Behavior with the Example of the Formula Student Race Car of the University Duisburg-Essen

 

Frédéric Kracht, Alex A. Roempler Dellien and Dieter Schramm

P042

Pressure Distribution Of The Car Seat: A Comparison

 

Nur Anis Fasha Roslan, Nor Kamaliana Khamis and Baba Md Deros

P086

Effects of Quarter-Wavelength Resonators on Air Intake Module of an ICE Engine using 1-Dimensional Method

 

Afiq Aiman Dahlan, Mohd Farid Muhamad Said, Muhammad Hariz Khairuddin, Khairuldean Abd Kadir and Mohd Anuar Mohd Yusoff

P114

Extra Strengthening Of Al-Si Alloy (Lm4) Through High Pressure Torsion Process And Subsequent Aging

 

Mohammad Faizal Khalid, Intan Fadhlina Mohamed, Mohd Zaidi Omar and Wan Fathul Hakim Wan Zamri

12.15 – 12.30

P029

Time-Frequency Analysis Of Automotive Component Strain Data Using The Hilbert-Huang Transform

 

Nadia Nurnajihah Mohamad Nasir and Shahrum Abdullah

P043

Upper    Limb    Muscle    Activities While Controlling Steering Wheel

 

Azizir Halim Ismail, Nor Kamaliana Khamis and Baba Md Deros

P040

Reducing NOX Emission of HD diesel Engine with Changing  the Fuel Injection Parameters

 

Saeed Chamehsara and Seyed Mostafa Mirsalim

P009

Numerical Simulation Analysis of Wood/PP Composites for Injection Moulded of  Car Battery Tray

 

Zakaria Razak, Abu Bakar Sulong, Norhamidi Muhamad, Mohd Khairul Fadzly Md Radzi, Nur Farhani Ismail, Dulina Tholibon and Izdihar Tharazi

12.30 – 12.45

P105

Experimental Analysis of Racing Car Chassis for Modal Identification

 

Muhammad Nur Aizat Zainal, Muhamad Azhan Anuar, Ahmad Azlan Mat Isa and Zamri Abdul Rahman

P074

HIRARC Related to Road Transport among School Children and Teacher in Malaysia

 

Noor Adilah Hamzah, Ahmad Rasdan Ismail, Nor Kamilah Makhtar, Nurul Husna Che Hassan, Darliana Mohamad and Baba Md Deros

P092

Combustion Characteristics of a Direct Injection Diesel Engine Fueled with Diesel-Ethanol– Palm Oil Methyl Ester Blends

 

Norhidayah Mat Taib, Mohd Radzi Abu Mansor, Wan Mohd Faizal Wan Mahmood, Muhammad Hakimi Mohd Shafiai and Nik Rosli Abdullah

P077

Investigation of the Quality and Mechanical Properties for Spot Welding of Reworked Galvanneal and High Strength Steel (HSS)

 

Mohd Harris Fadhilah Zainudin, Najiyah Safwa Khashi’Ie and Muhammad Saiful Ridzwan Ab Rahim

12.45 – 14.00

Lunch

14.00 – 14.45

Keynote 3: Intelligent Transport and Cognitive Analytic at IBM Research in Singapore: Current Projects and Visions for the Future Dr. Laura Wynter (Director, IBM Research Collaboratory, Singapore)

GrandBallroom

(Chairperson: Assoc. Prof. Dr. Sallehuddin Mohamed Haris)

Room

Grand Ballroom

Matahari I

Matahari II

Cempaka I & II

Sessions

Applied Mechanics/Control

Ergonomics

Thermofluids/Combustion

Special Lecture I

Chairperson

Prof. Dr. David Barton

Dr. Ezrin Hani Sukadarin

Ir. Dr. Zambri Harun

14.45 – 15.00

P061

A Study on Electrical Consumption, All Electric Range, Fuel Economy and Emissions of PHERB Powertrain

 

Salisa Abdul Rahman and Siti Norbakyah Jabar

P111

Soleus Muscle Fatigue Using Surface EMG Based On Driver’s Knee Angle Posture More Than 144º For Foot Pressing And Releasing An Acceleration Pedal

 

Ahmed Rithauddeen Yusoff, Baba Md Deros, Dian Darina Indah Daruis and Leonard H Joseph

P049

Performance Study of Adsorption Cooling System Driven by Waste Heat from Engine

 

Khairul Habib and Nurul Afiqah Kamaruzaman

 

 

 

 

Apple for Teaching and Learning

 

Prof. Ir Dr. Ahmad Kamal Ariffin

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Apple for Teaching, Learning and Productivity

Prof. Ir Dr. Ahmad Kamal Ariffin

15.00 – 15.15

P081

A Rapid Technique in Evaluating Tree Health Using LiDAR                     Sensors            on Autonomous Vehicles

 

Siti Farhanah Rosli, Fazida Hanim Hashim, Wan Mimi Diyana Wan Zaki and Aini Hussain

P083

Developing Car Seat Ergonomically Based on Anthropometry Measurement

 

Mugilan   Muralitharan   and    Syed Helmi Al Haddad

P050

Performance of Free-Piston Linear Generator by Using Compressed Air

 

Izzat Amir Zafri Jamal, Nur Amalina Ramlan, Ezrann Zainal Zainal Abidin, Abdul Rashid Abdul Aziz and Firmansyah

15.15 – 15.30

P056

Development      of      Magnetic Gears: A Review

 

Abdullah      Al      Faysal      and Sallehuddin Mohamed Haris

P046

Relationship     Between     Driving Posture and Muscle Contraction

 

Darliana Mohamad, Baba Md Deros, Dian Darina Indah Daruis and Ahmad Rasdan Ismail

P052

Time-averaged Heat Transfer and          Vortex    Shedding    of    a Singular and Twin Heated Bluff Bodies in Cross Flow

 

Amin Etminan, Eslam Reda, Zambri Harun and Ahmad Sharifian

15.30 – 15.45

P031

Effect of Data Editing Technique Based on Strain Approach to Investigate the Fatigue Damage Retention

 

Reza Manouchehry Nya and Shahrum Abdullah

P048

Soleus Muscle Contraction on Driver’s Knee Angle Posture  More Than 144º for Foot Pressing And Releasing an Automotive Pedal

 

Ahmed Rithauddeen Yusoff, Baba Md Deros and Dian Darina Indah Daruis

P108

Electrical Conductivity of Silicon Dioxide (SiO2) Nanofluids for Thermo-electric Cooling Applications

 

Suleiman Akilu, Aklilu Tesfamichael Bajeta and Korada Viswanatha Sharma

15.45 – 16.00

Coffee Break

Room

Grand Ballroom

Matahari I

Matahari II

Cempaka I & II

Sessions

Applied Mechanics/Control

Ergonomics

Thermofluids/Combustion

Special Lecture I

Chairperson

Dr. Laura Wynter

Nor Kamaliana Khamis

Assoc. Prof. Dr. Wan Mohamed Faizal Wan Mahmood

16.00 – 16.20

Invited Paper 1

P122

Complex Event Processing for Smart and Connected Vehicle Application

 

Mohamad Hanif Md Saad, Aini Hussain, Abdullah Syafiq Salam and Rabiyah Adawiyah Shahad

 

 

Invited speaker session

 

(Please proceed to Grand Ballroom or Matahari II)

Invited Paper 2

P041

The Advances in Surface Roughness Effects Studies in Transportation Industries

 

Zambri Harun, Sohif Mat, Bagus Nugroho and Leon Chan

 

 

Apple for Teaching, Learning and Productivity

 

Prof. Ir Dr. Ahmad Kamal Ariffin

16.20 – 16.35

P034

A New Analytical Model for Improved Calculation of the Centre of Pressure and Friction Coefficient in a Multi- piston Automotive Disc Brake

 

Tomas Budinsky, Peter Brooks and David Barton

P101

Experimental Investigation on  the Aerodynamic Performance of Optimised Pedestrian Crash Friendly Sedan Front End Profiles

 

Kausalyah Venkatason, Noor Ilya M.R, Nur Azia I, Shasthri S, Baljit S.B.S.

P014

Surface Roughness Effects on Turbulent Boundary Layer Structure of NACA 0026 airfoil

 

Ashraf Amer Abbas, Zambri Harun, Wan Aizon W. Ghopa and Sohif Mat

16.35 – 16.50

P035

A Fault Diagnosis Expert System for Commercial Bus Design

 

Tan Chee Nian and Tan Chee Fai

P063

A Systematic Review on Parents’ Perception in the Use of Child Restraint System (CRS)

 

Noor Faradila Paiman and Baba Md Deros

P011

Large Eddy Simulation of Malaysian Mass Rail Transit Tunnel

 

Razieh Khaksari Haddad, Zambri Harun and Mohammad Rasidi Mohammad Rasani

16.50 – 17.05

P047

Development of Light Weight Front Lower Control Arm (FLCA) for C-segment Passenger Car

 

Mohd Hafizi Abdul Rahman, Mohd Shukor Salleh, Mohd Suffian Ab. Razak, Liza Anuar and Nur Adzly Mohamad Saad

P085

Automotive Seat Fit Parameters Based on Representative Nigerian Anthropometric Data

 

Muhammad Abdulazeez Uba, Kassim Abdulrahman Abdullah and Waleed Fekry Faris

P015

Heat Transfer Enhancement by Using Twin Jet Impingement Mechanism

 

Mahir Faris Abdullah, Rozli Zulkifli, Zambri Harun, Ashraf Amir Abbas, Shahrir Abdullah, Wan Aizon Wan Ghopa, Kamaruzzaman Sopian and Ali Ahmed Gitan

17.05 – 17.20

P120

A Software Tool for Multiple Model Adaptive Control Design in Active Suspension System Applications

 

Ahmad    Ruzaini    Rahim    and Sallehuddin Mohamed Haris

P073

The Study of Seating Pressure on Car Seat between National Cars (Proton Saga and Perodua Myvi)

 

Mohd Hidayat Ab Rahman and Nurul Ain Maidin

P091

Study on the Effect of Modification of Side Pot and Diffuser to the Aerodynamics of F1 IN SCHOOLS Car

 

Mohamad Faiz Paturrahman, Mohd Radzi Abu Mansor and Zambri Harun

17.20 – 17.35

P026

Effects of Mean Stresses on the Durability Assessment for an Automobile Crankshaft Using Markov Chain Modelling Technique

 

Salvinder  Singh   and   Shahrum Abdullah

P126

Mechanism to Generate Trailing Echoes for Polygonal Buffer Rods in Ultrasonic Pulse-Echo Measurements

 

Farhana Mohd Foudzi and Ikuo Ihara

P004

CFD Simulation of Automotive Pollutant Dispersion in High- Rise                  Building            Urban Environment under Deeply Stable Atmospheric Condition

 

Eslam Reda, Wan Mohamed Faizal Wan Mahmood, Rozli Zulkifli and Zambri Harun

End of Day 2

  

Thursday 10th August 2017 (Day 3)

8.50 – 9.30

Keynote 4: Life Cycle Engineering for a Sustainable Automotive Design: Challenges and the Way Forward Prof. Dr. Yasushi Umeda (University of Tokyo, Japan)

Grand Ballroom

(Chairperson: Assoc. Prof. Ir. Dr. Rozli Zulkifli)

9.30 – 10.15

Keynote 5: Recent Progress in Internal Combustion Engine Technologies Prof. Dr. Kazunari Kuwahara (Osaka Institute of Technology, Japan)

Grand Ballroom

(Chairperson: Assoc. Prof. Ir. Dr. Rozli Zulkifli)

10.15 – 10.40

Coffee Break

 

Grand Ballroom

Matahari I

Matahari II

Cempaka I &II

Sessions

Applied Mechanics/Control

Ergonomics

Thermofluids/Combustion

Materials

Chairperson

 

Dr. Rahizar Ramli

 

Darliana Mohamad

Dr Mohamad Rasidi Mohamad Rasani

 

Prof. Dr. Mohd. Zaidi Omar

10.40 – 10.55

P117

Modeling and Simulation of Induction Motor for Electric Vehicle

 

Yushaizad Bin Yusof Yusof and Kamarulzaman Bin Mat Mat

P013

Revisiting Pedestrian Casualties in Malaysia and the Escalating New Threats

Mohd Syazwan Solah, Baba Md Deros, Aqbal Hafeez Ariffin, Azhar Hamzah, Zulhaidi Mohd Jawi & Sharifah Allyana Syed Mohamed Rahim

P099

Performance of Stratified Charged CNGDI Engine with Application of LSVD on Turbocharger Compressor

 

Hilmi Amiruddin, Wan Mohd Faizal Wan Mahmood, Shahrir Abdullah, Mohd Radzi Abu Mansor, Rizalman Mamat, Azri Alias and Mohd Fadzli Abdollah

P003

Investigation on Process- properties Relationship with Mechanical Properties of Lattice-structured Cellular Material for Lightweight Application

 

Nur Ameelia Rosli, Rafidah Hasan, Muhammad Khairi Baharudin and Mohd Rizal Alkahari

10.55 – 11.10

P121

Development of Low-Cost Cloud Based CO2 Monitoring System for Green City Application

 

Mohamad Hanif Md Saad, Mohd Zaki Sarnon, Aini Hussein, Mohd Faiz Shukri and M. Khairummuzamil Nordin

P045

Job Satisfaction among Professional Driving Instructors in Malaysia’s Road Transport Industry

 

Zulhaidi Mohd Jawi, Baba Md Deros, Mohd Hanif Saad and Ahmad Azad Ab Rashid

P102

Tumble Motion Evolution for GDI Engine Using Particle Image Velocimetry (PIV)

 

Mohammed El Adawy, Morgan Heikal, A.Rashid A.Aziz, Muhammad Siddiqui and Hasanain

A. Abdul Wahhab

P010

Study of Damage  Localization in Lightweight Additive Layer Manufactured Material Based On Vibration Characteristics

 

Muhamad Syafwan Azmi, Rainah Ismail, Rafidah Hasan and Mohd Rizal Alkahari

11.10 – 11.25

P017

Stress Analysis of Automobile Steering Knuckle Using Finite Element Method

 

Fadrah Hanim Ad Suhadak, Kamarul Ariffin Zakaria, Mohd Basri Ali and Mohd Asri Yusuff

P066

A Study of Psychophysical Factor (Heart Rate) For Driver Fatigue Using Regression Model

 

Mohammad Firdaus Ani, Seri Rahayu Kamat and Isa Halim

P106

Effect of Rotating Burner Rim on Flame Stabilization: Blow- off and Flash Back

 

Hasanain A. Abdul Wahhab, A. Rashid A. Aziz, M. El-Adawy and Mhadi A. Ismael

P016

Effect of Orientation on Fatigue Life Behaviour of Fiberglass Reinforced Composites

 

Roy Hanson Jimit, Kamarul Ariffin Zakaria and Omar Bapokutty

11.25 – 11.40

P053

Design and Implementation of Hybrid Vehicle using  Electrical, Solar and Mechanical Energies

 

Khalid G. Mohammed, Abd Jabbar Taha and Alaa Ahmed

P087

Validity and Reliability of Vicon Motion Capture Camera Over  the Traditional Anthropometric Method

 

Muhammad Fikri Zainuddin, Seri Rahayu Kamat and Ruzy Haryati Hambali

P124

Reactivity                   Controlled Compression Ignition Engine Management: A Review

 

Zuhairizan Yusof, Siti Umairah Mohamed Radzwan, Zuzailie Rosli, Aldaedin Alaa Razzaq Abdulmohsin and Mohd Radzi Abu Mansor

P020

Dry Sliding Wear Behaviour of Rheocast Al-5.7Si-2Cu-0.3Mg Alloy

 

M A Abdelgnei, M Z Omar, M J Ghazali, Mohamed A. Gebril  and

M.N. Mohammed

11.40 – 11.55

P097

TRIZ-based Inventiveness Classification of Silver Sintering Tools Used to Produce Power Module in Hybrids and Electric Vehicles

 

Kim S Siow, Zheng X Yong

P055

Preliminary Study on Visual Technology in Human Anthropometry  Measurement for Automotive Design

 

Mohd Faiz Wahid, Seri Rahayu Kamat, Syamimi Shamsuddin and Dian Darina Indah Daruis

P098

Optimisation of a Common Rail Engine for Palm Oil Biodiesel

 

Muhamad Adlan, Farid Nasir Ani and Masjuki Hassan

P022

New Developed Technique for Welding Dissimilar Steels

 

Mohammed N. Abdulraza, Mohd Z. Omar, Khaled Alhawary and Mnel A H Abdelgnei

Room

Grand Ballroom

Matahari I

Matahari II

Cempaka I &II

Sessions

Applied Mechanics/Control

Ergonomics

Thermofluids/Combustion

Materials

Chairperson

 

Dr John Yates

Dr Mohamad Hanif Mohamad Saad

 

Dr. Mohd Radzi Abu Mansor

 

Prof. Dr. Yasushi Umeda

11.55 – 12.15

P065

Distribution Characterisation of Coil Spring Strain Histories using Mixed Weibull Analysis

 

Mashitah Mahmud, Shahrum Abdullah, Salvinder Singh Karam Singh, Ahmad Kamal Ariffin Mohd Ihsan and Zulkifli Mohd Nopiah

P088

Analysis of Ergonomics and Personalised Insole in Reducing Muscle Fatigue of Prolonged Standing Industrial Workers

 

Siti Khadijah Khalil, Ruzy Haryati Hambali, Seri Rahayu Kamat, Norhazirah Lasa and Muhamad Fauzie Alwiy

P110

A Finite Mixture Von Mises Distribution for Wind Direction Analysis in Kuala Terengganu, Malaysia

 

Nortazi Sanusi, Azami Zaharim, Sohif Mat and Kamaruzzaman Sopian

P059

Effect of Travelling Speed on Quality and Welding Efficiency of Friction Stir Welded AZ31 Magnesium Alloy

 

Amirhossein Baghdadi, Nor Fazilah Mohamad Selamat and Zainuddin Sajuri

12.15 – 12.30

P076

Simulation Study on the Vehicle Speed Control in Longitudinal Direction using a New Continuously Variable Transmission (CVT) System

 

Muhammad Luqman Hakim Abd Rahman, Khisbullah Hudha, Zulkiffli Abd Kadir and Noor Hafizah Amer

P044

Car Driver Acceptance of Lane Change Assistance System

 

Mohd Hafzi Md Isa, Baba Md Deros and Mohd Radzi Abu Mansor

P112

Wall Heat Transfer Analysis of Internal Combustion Engine with Free Piston Linear Motion

 

Mior Azman Meor Said, Lau Kah Mun and Abdul Rashid Abdul Aziz

P067

Crashworthy Behaviour of Bombyx Mori Composite Cylindrical Tubes

 

Albert Ude and Che Husna Azhari

12.30 – 12.45

P030

Fatigue and Vibration Analysis of a Formula Car Suspension System

 

Yat Sheng Kong, Shahrum Abdullah, Mohd. Zaidi Omar, Sallehuddin M. Haris, Dieter Schramm, Tobias Bruckmann and Frédéric Kracht

P116

Indoor Air Quality towards Malaysian Public Transport Ergonomic Environment

 

Wan Hasrulnizzam Wan Mahmood, Fatimah Abdullah and Seri Rahayu Kamat

P119

Simulation          Study            of Thermophoresis Effect on the Movement of Soot Particles in an Engine Cylinder

 

Nur Hafizah Habideen, Wan Mohd Faizal Wan Mahmood, Zambri Harun, Muhammad Ahmar Zuber and Fadzli Ibrahim

P069

Microstructure Evolution in Al- 5.7Si-2Cu-0.3Mg Alloy by Reheating in High Frequency Induction Heating for Thixoforming Process

 

Saziana Samat, Mohd Zaidi Omar, Intan Fadhlina Mohamed and Mohd Anif Mohd Arif

12.45 – 13.00

P107

A Computational Aerodynamic Study of Tandem Wheels in Contact with the Ground.

 

Mohammad Rasidi Rasani, Azhari Shamsudeen, Zambri Harun and Wan Mohd Faizal Wan Mahmood

P075

Road Safety Awareness Training Among School Teachers in Kelantan

 

Nurul Husna Che Hassan, Ahmad Rasdan Ismail, Nor Kamilah Makhtar, Noor Syuhadah Subki, Muhammad Azwadi Sulaiman and Baba Md Deros

P109

Effect of Injection Timing on Performance, Emissions, and Combustion Characteristics of Split Injection Strategy Diesel Engine Fueled with Biodiesel Blended Fuels

 

Heoy Geok How, Yew Heng Teoh, H.H. Masjuki and M.A. Kalam

P115

The Effects of Cooling Slope on the Semisolid Microstructures of           Al-4.8Si-2.8Cu-0.5Mg

Aluminium Alloy

 

Mohd Anif Mohd Arif, Mohd Zaidi Omar, Zainuddin Sajuri and Saziana Samat

13.00 – 14.15

Lunch

14.15 – 14.55

Keynote 6: How to tackle the new pass-by noise regulations and its challenges? Dr. Filip Deblauwe (LMS International/Siemens, Belgium)

Grand Ballroom

(Chairperson: Assoc. Prof. Dr. Zulkifli Mohd Nopiah)

Room

Grand Ballroom

Matahari I

Matahari II

Cempaka I &II

Sessions

Applied Mechanics/Control

Noise/Vibration/Comfort

Process/Manufacturing

Special Lecture II

Chairperson

Assoc. Prof. Dr Zarhamdi

Mr. Zulhaidi Mat Jawi

Prof. Ir Dr. Shahrum Abdullah

15.00 – 15.20

Invited Paper 3

P103

Microstructure, Mechanical Properties and Fatigue Behaviour of AlSi10Mg Additive                          Manufacturing Materials

 

Muhamad Aqil Azri, Mohd Shamil Shaari and Ahmad Kamal Ariffin

Invited Paper 4

P125

Vehicle Engine Monitoring using Piezo-Film Sensors and Analysing with  Z-Freq Technique

 

N.A. Ngatiman, M.Z. Nuawi and S. Abdullah

Invited Paper 5

P095

Effect of Temperature on Mode Ii Interlaminar Fracture Toughness of Silk Fibre/Epoxy Composites

 

Rozli   Zulkifli  And   Che   Husna Azhari

 

 

 

 

Intelligent Driver Assistant System For Vehicle Application

 

Prof. M.A. Hanan

15.20 – 15.35

P079

Analysis of BIW Framing Systems in Automotive Industry: A review

 

Mohamad Zamri Md Zain, A Majdi Abdul Rani and Mohd Amin Abd Majid

P060

Contact Force and Dynamic Behaviour of Automobile Wiper Blade System

 

Ismasyariff Salleh, Mohd Zarhamdy Md Zain and Abdul Rahim Abu Bakar

P018

Concurrent Engineering for Upperstream Process of Stamping Dies

 

Azman Senin, Zulkifli Mohd Nopiah, Ahmad Kamal Ariffin Mohd Ihsan, Shahrum Abdullah, Dzuraidah Abdul Wahab and Ahmad Zakaria

 – 15.50

P082

Vehicle Stability Control Based on  Control  Yaw  Moment  – A Review

 

Mohd Firdaus Omar, Intan Mastura Saadon, Rozaimi Ghazali and Muhamad Khairi Aripin

P072

Validation      Study   on        External Wind   Noise   Prediction        using OpenFOAm

 

Mohamed Sukri Mat Ali, Jafirdaus Jalasabri, Anwar Mohd Sood, Shuhaimi Mansor and Nur Haziqah Shaharuddin

P113

Optimization Pocket Milling Process by using Biogeography-Based Optimization (BBO)

 

Rizauddin Ramli and Khashayar Danesh Narooei

15.50 – 16.05

P084

Mathematical Modelling and Design of Counterweights for Unbalanced Links

 

Abdullah Jamil and Masri Baharom

P093

Torsional Vibration Analysis of Centrifugal Pump Shaft Vertical Axis

 

Hendri Chandra, Fauziana Lamin, Ahmad Kamal Ariffin

P118

An Inventory Recovery Model of a Two Stage Supply Chain System Subject to Supply Disruption with Safety Stock Consideration

 

Noraida Azura Md Darom, Hawa Hishamuddin, Rizauddin Ramli and Zulkifli Mohd. Nopiah

16.05 – 16.20

P090

Characterisation of Different Armoured Plates Used by Armoured Vehicle Against Shaped Charge Penetration

 

Khairul Hasni Kamarudin, Ahmad Mujahid Ahmad Zaidi, Norazman

M. Nor, Ariffin Ismail, Mohamad Faizal Abdullah and Nurul Izzah Hidayah Lim Abdullah

P123

Effects of Parameters of Helmholtz Resonator on Transmission Loss of Hybrid Muffler

 

Thiha Zaw, Aminudin Abu, Noor Fawazi Noor Rudin and A.M. Wahab

P094

Reliability Studies of Remanufacturable Components for Extended Life Cycle

 

Ammer Ezhar Mohd Razalli, Dzuraidah Abd. Wahab and Ahmad Kamal Ariffin Mohd. Ihsan

16.20 – 1635

P064

Durability Analysis for Coil Spring Suspension Based on Strain Signal Characterisation

 

Chuin    Hao    Chin,    Shahrum Abdullah, Ahmad Kamal Ariffin and Salvinder Singh Karam Singh

P051

Applicability of a Rotary Eddy Current Damper in Passenger Vehicle Suspension with Parallel Inerter

 

Ming Foong Soong, Rahizar Ramli, Ahmad Abdullah Saifizul and Mahdieh Zamzamzadeh

P019

End-of-Life Product Recovery Chain Planning and Future Research Needs

 

Nurhasyimah Mohamad-Ali, Raja Ariffin Raja Ghazilla, Salwa Hanim Abdul-Rashid, Novita Sakundarini, Aznijar Ahmad-Yazid and Lydyaty Stephenie

16.35 – 17.00

Coffee Time and Networking

End of Conference

The programme schedule can be downloaded below:

Click here to download